HOW TO SPOT OLD IRONSIDES FAKES IDS: 7 RED FLAGS YOU CAN T IGNORE
Old Ironsides fakes flood the commercialize because the name carries weight real IDs from this marketer are known for crease holograms and tight surety features. Scammers exploit that reputation by slapping the Old Ironsides logo on low-quality knockoffs. If you re holding one, these seven red flags will tell you in seconds whether it s legit or a scam.
WHAT EXACTLY IS AN OLD IRONSIDES FAKE ID?
An Old Ironsides fake is any ID that claims to be from the Old Ironsides trafficker but fails to play off the vender s flow production standards. Real Old Ironsides IDs use a particular polycarbonate core, integrated holograms, and UV ink that glows under 365 nm light. Fakes often skip the core, use stick-on holograms, or print UV ink that only reacts under 395 nm. The difference isn t perceptive it s the gap between a 200 ID and a 20 novelty.
Real Old Ironsides IDs are made in modest batches with serialized trailing. Each sight has a unique QR code that scans to a check page on the trafficker s site. If the QR code is missing, leads to a dead link, or shows a generic ID proven subject matter instead of whole lot-specific inside information, you re looking at a fake. Scammers can t retroflex the trafficker s backend system of rules, so they either skip the QR or copy a atmospherics pictur from a real ID.
HOW CAN I TELL IF THE HOLOGRAM IS REAL OR A STICKER?
Real Old Ironsides holograms are embedded in the polycarbonate stratum and shift colors when inclined under point light. The primary holograph shows a ship s wheel that rotates 360 degrees, with microtext around the rim that reads OLD IRONSIDES in 0.2 mm font. Fakes use a pricker or a laminated overlie; the wheel around looks flat, the microtext is foggy or lost, and the colors don t shift swimmingly.
Run your fingernail across the holograph. If it catches or feels increased, it s a spikelet. Real holograms are flush with the card come up. Also the edges real holograms fade into the card stuff, while stickers have a sharply, viewable surround. If the holograph peels when sodden in warm water for 30 seconds, it s a fake.
WHAT S THE DEAL WITH THE UV INK HOW DO I TEST IT?
Real Old Ironsides IDs have UV ink that glows brightly putting green under a 365 nm UV dismount. The ink forms a repetition pattern of the marketer s logo and the state seal, telescopic only on the look and back. Fakes either skip UV ink entirely or use catchpenny ink that glows blue under 395 nm, the wavelength of most call flashlight UV attachments.
Buy a devoted 365 nm UV flashlight call attachments won t cut it. Shine it on the ID in a dark room. If you see a pass out blue glow or no glow at all, it s fake. Real UV ink pops instantly and doesn t asperse when rubbed with a damp fabric. If the ink smudges or fades, the ID was written on a monetary standard inkjet or laser printer.
IS THE FONT ON THE ID A DEAD GIVEAWAY?
Yes. Real Old Ironsides IDs use a proprietary font titled OI-Secure for all variable text name, address, DOB, and ID number. The font has a slight right tilt, fast kerning, and a unique 4 with a unsympathetic top. Fakes default on to Arial, Times New Roman, or a free font ois fakes IDAutomationHC39M, which has wider spatial arrangement and a different 4 form.
Print a real ID templet from your put forward s DMV website. Overlay the fake ID on top and hold it up to a light. If the letters don t coordinate perfectly, the font is wrong. Also check the I in ID real OI-Secure font has a modest seriph at the top; fakes usually don t.
WHY DOES THE MAGNETIC STRIPE MATTER, AND HOW DO I CHECK IT?
Real Old Ironsides IDs have a high-coercivity magnetised stripe encoded with the same data as the front of the card. Fakes either skip the stripe or use a low-coercivity streak that demagnetizes after a few swipes. Swipe the ID through a card subscriber if it beeps but shows scrambled data or nothing at all, the streak is fake.
Use a free magstripe reader app on your telephone. Swipe the ID and equate the yield to the written data. If the name, ID add up, or termination date doesn t match, the streak wasn t encoded decent. Real grade insignia also have a smooth, consistent texture; fakes feel rough in or have circumpolar glue lines where the streak was applied.
HOW CAN I VERIFY THE MICROPRINT WITHOUT A MICROSCOPE?
Real Old Ironsides IDs have microprint in three locations: around the holograph, along the posit seal, and under the photograph. The text reads OLD IRONSIDES SECURE in 0